End-user // Products // Extraction arms // System 50 - (Ø50)

System 50 in Aluminium and Antistatic

System Overview: Click on the article no. to open product specifications.
alsident® system 50			AL			AS
alsident® system 50			+ joint colour
Table 2-joints	Working Range [mm]	Basic Article no.	Red	White	Black	Table 2-joints	Article no.
	445 545 645 745	50-27-1 50-37-1 50-47-1 50-57-1	-4 -4 -4 -4	-5 -5 -5 -5	-050 -050 -050 -050		50-27-1-6 50-37-1-6 50-47-1-6
Table 3-joints	Working Range [mm]	Basic Article no.	Red	White	Black	Table 3-joints	Article no.
	765 945 1125 1425	50-3727-1 50-4737-1 50-5747-1 50-8747-1	-4 -4 -4 -4	-5 -5 -5 -5	-050 -050 -050 -050		50-3727-1-6 50-4737-1-6 50-5747-1-6
Wall/Ceiling 2-joints	Working Range [mm]	Basic Article no.	Red	White	Black	Wall/Ceiling 2-joints	Article no.
	430 530 630 730	50-27-3 50-37-3 50-47-3 50-57-3	-4 -4 -4 -4	-5 -5 -5 -5	-050 -050 -050 -050		50-27-3-6 50-37-3-6
Wall/Ceiling 3-joints	Working Range [mm]	Basic Article no.	Red	White	Black	Wall/Ceiling 3-joints	Article no.
	750 910 1125 1080 1380 1660	50-3727-3 50-4737-3 50-4767-3 50-5747-3 50-8747-3 50-8787-3	-4 -4 -4 -4 -4 -4	-5 -5 -5 -5 -5 -5	-050 -050 -050 -050 -050 -050		50-3727-3-6 50-4737-3-6 50-5747-3-6 50-8747-3-6

Alsident® System 50 - for air volumes between 45 - 85 m3/h and in diameter Ø50.

System 50 is applicable in trades with small pollution sources and small amounts of pollution such as the electronics industry, laboratories, dental clinics, laser technique, classrooms in schools, hairdressing schools and hairdressing salons, nail salons, decorator workshops and goldsmith's workshops.

System 50 Antistatic (AS)

Alsident^® System Antistatic is approved for use in ESD-areas according to IEC 61340-5-1 and therefore has a wire with a resistance of 1MW attached to the socket pipe.

You will find more information in the test report from Delta and in the mounting instructions.

Read more in "Guide to choise of material".

Working range

Alsident^® System 50 covers of a wide range of models which are mutually complementary with working ranges up to 1660 mm. System 50 extraction arms are prepared for a quick installation with standard brackets for table, wall or ceiling. The wide selection of hoods, makes it possible to choose the best extraction arm for your individual work station.

Colours

In System 50 AL it is possible to choose between 3 standard colours of the joints - red, white and black. The colour code is added to the basic article number as -4, -5 or -050.

An extraction arm from Alsident^® System is built of 3 basic elements; an extraction arm, a bracket and a hood. Select each basic unit to obtain a set.

Special Solutions

In addition to our standard range, we are able to deliver special solutions adapted to customer specific needs. Our technical department is always at your service with advice. For further information please contact your Alsident^® dealer.

Please remember that we offer short delivery times for both standard and special solutions of the best Alsident^® quality.

Technical Specifikations:
	aluminium	antistatic
Recommended Airflow: Normal: Minimum: Maximum:	65 m3/h 45 m3/h 85 m3/h	65 m3/h 45 m3/h 85 m3/h

Air Temperature:	-15°C - +90°C	-15°C - +90°C

Materials: Pipes: Diameter: Joints: O-rings: Flanges: Damper: Thumbscrews: Threaded Stays: Spring:	Anodized aluminium Ø50 mm (external) Polypropylene (PP) Polyethylene (PE) Polypropylene (PP) Polyethylene (PE) Polypropylene (PP) Acid-proof stainless steel (AISI 316L) Acid-proof stainless steel (AISI 316L)	Chromated aluminium (TCP) Ø50 mm (external) Conductive polypropylene (PP) Conductive polypropylene (PP) Conductive polypropylene (PP) Polyethylene (PE) Polypropylene (PP) Acid-proof stainless steel (AISI 316L) Acid-proof stainless steel (AISI 316L)

Download files:
file	description
Brochure	Brochure on System 50 with a complete overview of all the article nos. for this system. In A4 printable pdf.
Capture Efficiency	Test report for different hoods and positions. Tested by the Danish Technological Institute.
User's Manual	Manual on cleaning and maintenance of System 50, adjusting the spring and positioning the hood.
Mounting Instructions	Link to mounting instructions for System 50.
Connection to wall bracket	Flexible connection between wall bracket and ducting offering three different solutions.
ESD Test report	Test report for ESD-approval, tested by DELTA (www.delta.dk)
Pressure Drop	To determine the pressure drop at a specific air flow.
Working Areas	Choose the correct extraction arm. The working area of each model is illustrated in these diagrams.